1968 Ford GT 40

Summary

  • Year of manufacture 
    1968
  • Car type 
    Other
  • Lot number 
    152
  • Drive 
    RHD
  • Condition 
    Used
  • Exterior brand colour 
    White
  • Location
  • Exterior colour 
    Other
  • Gearbox 
    Manual

Description

You can book an appointment to view this the FORD GT40 with Lionel Abbott. Please make contact on 07831 574381 to agree a suitable date and for location details.The health and safety of both our customers and team remains the utmost priority, we are therefore operating to strict COVID-19 guidelines and full instructions will be given when making your appointment.Built by the late Terry Drury who, whilst working at Ford (FAV), was involved with the development of the GT40 from the startAs a privateer, Terry owned and raced two original GT40s (#1005/#1073) during 1967/1968The chassishas a number of fuel crossoverfeatures that date it as being an early exampleThe meticulous build during 2017/2018 utilised a huge number of original GT40 parts that he had acquired over the yearsFitted with a period-correct 'Works' 302 ci,four-bolt main bearing, Gurney-Weslake Ford V8 and a ZF Le Mans gearboxWhen original parts weren't available from TDR's stock or couldn't be sourced worldwide, they were fastidiously remanufactured to the original specificationCorrectly finished, trimmed and assembled with tremendous attention to period accuracyA superb homageto TDR's two happy seasons with #1005 & #1073 just over 50 years agoFollowing on from their success at Le Mans in 1966, Ford was not short of privateer teams wanting to purchase a GT40 and amongst thosecustomers was Terry Drury, a former Ford engineer and well-respected figure in the world of international GT and saloon car racing. During 1967, he entered his Ermine White Ford GT40 #1005 for the Monza 1000 Kilometres in April sharing with Jackie Oliver, however, head gasket failure ended their race after just three laps. The next outingwas the 'BOAC International 500', a six-hour race at Brands Hatch in which Terry shared #1005, now resplendentin Purple, with Keith Holland, qualifying 28th and finishing a respectable 14thin a field that today reads like a 'Whos Who'of international racing drivers.In August 1968, Terry once again entered the BOAC International 500 sharing with Keith Holland but this time in his new car, #1073, however,falling oil pressure resulted in a premature exit. With the car repaired, it was off to the Nurburgring 1000 Kilometres in May this time sharing with Terry Sangar and finishing 35th (6th in Class). A week later the two Terrys headed forthe Spa 1000 Kilometres with #1073, qualifying an excellent 11th before a broken clutch sadly ended the day.The GT40 had a spot-welded sheet-steel monocoque, with square-tube stiffeners linking the scuttle to the nose, and a detachable framework supporting the tail against the riveted sheet steel and duralumin structure. There were also multi-tube frameworks at either end and these monocoques were built in Coventry.The early cars featured whatbecame known as "fuel crossover" chassis which in period would have embodied two fuel crossovers between the left and right-side sill tanks, one passing through the dash section and the second via a rubber pipe passing under the driver's legs. Considered a bit risky, even at the time, the system was later changed and no replica or continuation chassis used a 'fuel crossover'.With close ties toFord and always requiring spares and running consumables, Terry Drury built up a very comprehensive spare parts stock including a 'Works' 302 cubic inch, four-bolt main bearing, Gurney-Weslake Ford V8 and a ZF Le Mans gearbox. The inventory, we understand,included a tub featuring the infamous fuel-cross over fabrications and it is believed that thisspare monocoque was supplied to Terry after #1073 was damaged at Monza, however, the damage turned out to be less serious than initially thought and the new tub was put aside.Fast forward some fifty years and after a lifetime in motorsport,it was decided that Terry Drury Racing would set about assembling their GT40as an homage to #1005 and #1073, utilising many original parts, and the period Gurney-Weslake and ZF-1 gearbox. As the project started, Silverstone Auctions were invited to the TDR premises and to viewthe etch-primed bare monocoque, still tight as a drum, and discusswith Terrythe build specification and the plethora of original works parts that would be incorporated in the build.A new wiring loom to the original specificationwas used, however, original factory connector plugs for the front and rear bodywork are used. The steering column and rack are original items together with refurbished tie-rods. The steering column flasher stalk is original, as are the Lucas switches and warning lights. Both the heated screen and the original wiper motor mechanism operate and theventilation system on the dash features the original eye-ball air vents and dash centre windscreen vent. Another rare feature is the foot vent on the passenger side centre section, designed to extract hot air from the tunnel carrying internal pipework from the front radiator and engine. The front and rear uprights are original factory Magnesium items (one rear upright has 1015 stamped on it) as are the tubular wishbones, driveshafts, hubs and rear roll bar and the original Konidouble adjustable spring/damper unitswererebuilt by 'TrueChoice' in the USA. The front wheels are original BRM Magnesium 15 x 9 inch but the rears are remanufactured 15 x 14 inch to the same BRM Magnesium specification withHalibrand spinners.The original 'Works' 302 cubic inch, 4-bolt main bearing Gurney Weslake Ford V8 is complete with its originalsteel crank, 'Indy' rods, andworks peak-top pistons with the bore size remaining at4-inches. The rocker assembly was acquired with other miscellaneous parts from Dan Gurney's private collection and original Italian Weber 48 IDA carburettors are fitted. The build of the engine was sadly interrupted by Terry's passing but was completedby his sons, Jack and Steven and time-served TDR mechanics. Anew aluminium radiator and oil cooler were fabricatedto original specand a fan ensures temperatures stay within limits. The engine oil cooler is housed in an original mount withperiod-correct fittings and the gearbox oil cooler is located where Terry Drury preferred, on top of the rear subframe. The fuel system features brand-new FIA-approved Premier tank bladders in each side pontoon (accompanied by their Certificates of Conformity) andboth pontoons retainthe original aluminium fuel tank closing panels. Fuel lines are in Aeroquip fed by the original Stewart Warner pumps, complete with a new rebuild kit. The fuel filler caps are also the original magnesium type with the,now very rare, vent valvesused on the earlycross-over monocoques. The car's brakes - new callipers, pads, vented disc and bells from BG Developments - are brand new but original specification and period correct. The brake lines have been run as original with copper piping routed through the monocoque in their original positions whilstsome of the flexible piping is nowin Aeroquip with safety in mind.The fibreglass seats were produced by the original trimmer and feature parachute material with those distinctivebrass eyelets. Many original body panels had beenretained by TDR over the years and we understand that thevented front section, rear body and doors with period-correct latches, wereas used at Monza, Spa and Le Mans.Although not a household name, Terry Drury played a significant part in the world of British motorsport for several decades. As well as building and racing some amazing Special Saloons whilst workingfor Ford, he played a significant role in Ford Advanced Vehicles helping develop the GT40. He was also responsible for the 'Supervan', a GT40-engined Ford Transit van and there was many a Transit van-driving teenager with a photograph of a sideways 450bhp Supervan on their bedroom wall. Many years later, whilst preparing a competitive Ford Falcon Sprint for the HSCC, it occurred to him that it might be fun to finallybuild his GT40 monocoqueinto a full car and recreate some of those happy days with #1005 and #1073.This 1968 GT40 is unique, in the proper sense of the wordconsisting of, not only this extraordinarily faithfully-constructed monocoque but so many original parts from Terry Drury's personal collection. It has been acknowledged by one of the most respectedGT40 specialists as themost accurate monocoque Ford GT40 that he has ever seen. Itoffersgreat potential as either a high-performance road car or indeed, subject to conforming with the relevant regulations, as an historic competition car eligible for a number of events and welcome everywhere,however, we feel that it'smore important than that. This remarkable car shares the DNA and the essence of Terry's memorable GT40s from their heyday, of #1005 at the BOAC in 1967 thundering down to Paddock Bend surrounded by the works Ferrari P4s and 250LMs, the Chapparal and the innumerable factory Porsche 910s, and of#1073, rattled and battered for nearly seven hours around the Green Hell of the Nordschleife in 1968 finishing a creditable 6th in class.This GT40 is part of sixties motorsport history that just happens to have arrived a little later.Lot No. 152 - 1968 Ford GT40https://youtu.be/M4H8YXiB12Utrue